Coverstitch

What do I need for my coverstitch?

Below are models listed that my binder fit. Click on the tabs to read more about your machine

The binder attachment fits all models (even those not listed below). What differs is how you attach the binder to the machine.

If you need the “plate” or if you can screw the binder directly to the machine. ” Sticky-stuff always works”.

Babylock

Babylock modeller

Yes, my binder fits well on Babylock coverstitch. Some models need the “plate” if you want to be able to attach the binder with screws.  Listed below 

Need the universalplate

  • Evolution
  • Accolade
  • Ovation
  • Desire

Do not need the plate. The binder can be attached direct on the machine

  • Babylock coverstitch (BLC2)
  • Euphoria
  • Triumph
  • Aspire
  • Primo
  • Gloria

The plate are attached to the machine with screws, and then you attach the binder to the plate with pink screws
Personally once the plate are installed I do not remove it. Just remove the binder when hemming or sewing other that binding.

An alternative to the plate are to attach the binder with “sticky-stuff” direct to the machine

Is your machine missing from the list? Don’t worry. If your Babylock coverstitch only has two screw holes by the foot – plate are needed. If there are four screw holes – No plate needed.

Brother coverstitch

No plate is needed

  • Model 2340 – Attach the binder direct on your machine with “sticky-stuff”
  • Model 3440 and 3550 –
    The binder can be attach direct on your machine (screws comes with the binder)

    * You may need to turn the rake (wavy part at the back of the binder) upside down for best placement.

Juki / Bernina coverstitch

  • Juki MCS 1500
  • Juki MCS 1700
  • Juki MCS 1800
  • Juki MO-735
  • (and other models of Juki coverstitch)
  • Bernina L220

The plate are needed if you want to attach the binder with screws

Alternative: choose use just the binder and use “sticky-stuff” to attach the binder to the machine

Pfaff, Singer, Husqvarna, Bernette

  • Pfaff coverlock 3.0 och 4.0
  • Husqvarna viking huskylock s21, s25
  • Singer coverstitch
  • Singer Pro 5
  • Bernette funlock (42, 44, 48)

The plate are needed if you want to attach the binder with screws

Alternative: choose use just the binder and use “sticky-stuff” to attach the binder to the machine

For this models there are a lovely foot with an edge to use with the binder. 

Link to the kit with plate and foot

Janome coverstich (elna)

Modell nr

  • 900
  • 1000
  • 2000
  • 3000
  • Elna

The plate are needed if you want to attach the binder with screws

Alternative: choose use just the binder and use “sticky-stuff” to attach the binder to the machine

For Janome coverstitch I have two great feet to use with the binder. The Short clear foot (with an edge) or the Clearview foot for coverstitch

Welcome!

Shipping to EU-customers Orders are submited with 25% VAT (tax/moms) 

Shipping to non EU-customers VAT do not apply

Prices and shipping will show correct taxes in the cart once address are added.

Click X to close